Product ID:CONTACT ADHESIVE, R-27708
MSDS Date:11/01/1991
FSC:8040
NIIN:00N052311
MSDS Number: BVLZB

RUBATEX CORP

805 MONROE ST
BEDFORD, VA 24523
US

Emergency Phone: 703-586-2611

Info Phone: 703-586-2611

Preparer: W.F. CREASY

Cage: IO124

RUBATEX CORP SUB OF GREAT AMERICAN INDUSTRIES INC

340 BEDFORD, VA 24523 US

Telephone: 800-378-4091

Cage: 82942

22 @ 68F.

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 14%

OSHA PEL 200 PPM

ACGIH TLV: 50 PPM, S

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

140 @ 68F.

CAS: 110-54-3

RTECS: MN9275000

Fraction By Weight: 33%

OSHA PEL 500 PPM

ACGIH TLV: 50 PPM

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

186 @ 68F.

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: 33%

OSHA PEL 1000 PPM

ACGIH TLV: 750 PPM;1000 STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:DIZZINESS, BREATHING DIFFICULTY,
HEADACHES & LOSS OF COORDINATION. SKIN CONTACT:CAN DRY & DEFAT
CAUSING CRACKS, IRRITATION & DERMATITIS. EYE CONTACT:SEVERE
IRRITATION, TEARING, REDNESS & BLURRED VISION. INGEST:CAN CAUSE
GASTROINTESTINAL IRRITATION, VOMITING, NAUSEA & DIARRHEA.
NOTE:TOLUENE (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:APPEARS ON THE NAVY LIST OF
OCCUPATIONAL CHEMICAL REPRODUCTIVE HAZARDS. SEEK CONSULTATION FROM
APPROPRIATE HEALTH PROFESSIONALS CONCERNING LATEST HAZARD LIST INFO
& SAFE HANDLING & EXPOSURE I NFO .
Medical Cond Aggravated by Exposure:ANESTHESIA, RESPIRATORY TRACT
IRRITATION, DERMATITIS, NAUSEA, VOMITING.

First Aid:INHAL:MOVE PERSON TO FRESH AIR. IF BREATHING STOPS, APPLY
ARTF RESP & SEEK IMMEDIATE MEDICAL ATTENTION. EYE:FLUSH W/LARGE
QUANTITIES OF WATER FOR AT LEAST 15 MINUTES. SKIN:WASH THOROUGHLY
W/SOAP & WAT ER & SEE MD. INGEST:DO NOT INDUCE VOMITING, CAN CAUSE
CHEMICAL PNEUMONITIS EDEMA. CONTACT MD IMMEDIATELY.

Flash Point Method:CC
Flash Point:-14F,-26C
Lower Limits:1%
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . WATER SHOULD NOT BE USED EXCEPT AS FOG TO KEEP NEARBY
CONTAINERS COOL.
Unusual Fire/Explosion Hazard:HANDLE AS FLAMM LIQ. VAPS FORM EXPLO MIXT
IN AIR BTWN UPPER & LOWER EXPLO LIMS WHICH CAN BE IGNITED BY MANY
SOURCES SUCH AS PILOT LIGHTS, OPEN FLAMES, (SUPDAT)

Spill Release Procedures:ELIMINATE IGNITION SOURCES, PROVIDE GOOD
VENTILATION, DIKE SPILL AREA & USE ABSORBANT MATERIAL TO CLEANUP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:USE NON-SPARKING UTENSILS WHEN
HANDLING THIS MATERIAL. AVOID HOT METAL SURFACES, USE IN COOL,
WELL-VENTILATED AREAS. KEEP CNTNRS CLSD WHEN NOT IN USE.
Other Precautions:KEEP AWAY FROM EXCESSIVE HEAT & OPEN FLAMES. SMOKING
IN AREAS WHERE THIS MATERIAL IS USED SHOULD BE STRICTLY PROHIBITED.
TOOLS USED W/THIS MATERIAL SHOULD BE MADE OF ALUMINUM, BRASS OR
COPPER. PLASTIC UTENSILS SHOULD NOT BE USED.

Respiratory Protection:WHEN SPRAYING THIS ADHESIVE USE NIOSH/MSHA
APPRVD CARTRIDGE RESP/GAS MASK TO KEEP AIRBORNE MISTS & CONCS BELOW
TWA/TLVS. WHEN USING IN POORLY VENTILATED & CONFINED SPACES, USE
NIOSH/MSHA APPRVD FRESH- AIR SUPPLYING RESP/SCBA.
Ventilation:GEN MECH VENT/LOC EXHST SHOULD BE SUITABLE TO KEEP VAP
CONCS BELOW TLV. VENT EQUIP MUST BE EXPLOSION-PROOF.
Protective Gloves:IMPERMEABLE CHEMICAL GLOVES.
Eye Protection:ANSI APPVD CHEM WORK GOGG W/FULL(SUPDAT)
Other Protective Equipment:USE IMPERMEABLE APRONS & PROT CLTHG WHENEVER
POSS TO PVNT SKIN CONT. USE OF HEAD CAPS WHENEVER POSS IS STRONGLY
(SUPDAT)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLO HAZ:ELECTRICAL MOTORS & SWITCHES. OTHER PROT EQUIP:RECOMMENDED.
EYE WASHES & SAFETY SHOWERS IN THE WORKPLACE IS RECOMMENDED. EYE
PROT: LENGTH FACESHIELD .

Boiling Pt:B.P. Text:>132F,>56C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:0.8 (H*2O=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NO
Appearance and Odor:NATURAL; OFFENSIVE ODOR.

Stability Indicator/Materials to Avoid:YES
ALKALINE MATERIALS, STRONG ACIDS & OXIDIZING MATERIALS.
Stability Condition to Avoid:EXCESSIVE HEAT, POOR VENTILATION,
CORROSIVE ATMOSPHERES, EXCESSIVE AGING.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
OXIDES OF NITROGEN & POSSIBLE ACROLEIN.

Waste Disposal Methods:COLLECT ABSORBENT/SPILLED LIQUID MIXTURE & PLACE
INTO METAL CONTAINERS. CONSULT LOCAL, STATE & FEDERAL HAZARDOUS
WASTE REGULATIONS BEFORE DISPOSING INTO APPROVED HAZARDOUS WASTE
LANDFILLS. OBEY RELEVA NT LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.